High-performance, multi-surface, water-dilutable acrylic enamel for floors and vertical surfaces.
Its formulation guarantees a resistant and durable film, applicable indoors and outdoors on multiple surfaces.
Easy to apply, it is suitable for DIY or professional use in civil and public environments, even those with high traffic.
The addition of "REFLOW Adhesion Promoter" allows direct application on cement, ceramics, stoneware, stones, tiles, formica, masonry, melamine and existing old paints.
Once mixed with the additive, the product can be used for 48 hours. After this time, the additive's effectiveness decreases, but unlike a traditional two-component product, the product can still be used!
To restore the product's full effectiveness, a new dose of the adhesion promoter can simply be added.
Ideal for touch-ups during or after construction!
It complies with the UNI 11021:2002 standard for applications in environments where HACCP (compatible with food premises) is required and, with the REFLOW ANTISKID additive, it is certified anti-slip in accordance with the DM 236 standard of 1989.
Features:
- High resistance
– Easy and versatile
– Direct application on various surfaces
Appearance: Satin
Colour: White & Colours according to colour chart or custom-made
Packaging sizes: 750ml & 2.5 liters
Preparation and Application of Substrates
| SUBSTRATES | PREPARATION | APPLICATION |
|---|---|---|
| TILES, SLABS, CERAMICS, TERRACOTTA, STONEWARE, KLINKER | Remove all impurities, dirt, grease, or oily substances by washing with a suitable neutral degreaser and lukewarm water. Allow the substrate to dry completely, taking care around the grout lines. | Add the REFLUX PROMOTER to the REFLUX GLAZING and mix well for a few minutes. Apply two coats of REFLUX GLAZING, leaving at least 12 hours between coats. On horizontal surfaces, ensure adequate slip resistance before applying the product. On horizontal surfaces, the surface will be walkable 24-48 hours after the second coat, while complete curing, which guarantees maximum durability, takes 7-10 days. |
| RAW CONCRETE | Remove all impurities, dirt, grease, or oily substances by washing with a suitable neutral degreaser. Wash thoroughly. Wait for the substrate to dry completely. Remove all dust. Helpful tip: Check the substrate's moisture level with appropriate instruments and avoid painting if it is visibly damp. | |
| PAINTED CONCRETE | If the existing paint layers are not well adhered, sand them manually or mechanically until completely removed, and also remove any dust generated. If the previous paint is well adhered, remove all impurities, dirt, grease, or oily substances and, if necessary, sand manually or mechanically. Remove all dust. Helpful tip: Check the substrate's moisture content with appropriate instruments and avoid painting if it is visibly damp. | |
| FORMICA, LAMINATE, SHEETS | Remove all impurities, dirt, grease, or oily substances by washing with a suitable neutral degreaser. Sand the surface with 150-grit sandpaper or a fine-grit abrasive sponge to remove any protective finish used in the production process of these materials. | |
| SPC FLOORS, LTV | Sand the surface with 150-grit sandpaper or a fine-grit abrasive sponge to remove any protective wax used in the production process of these materials. Remove all dust and other impurities, dirt, grease, or oily substances. |
EUH208: Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1), 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
EUH211: Warning! DropletsDangerous respirables may be formed during spraying. Do not breathe aerosols or mists.
Wet abrasion resistance Class 1 (very high) Cleaning the paint with water and a natural bristle brush. Possibility of adding a neutral or hygienic cleaner. Suitable for heavily used interior surfaces, e.g. entrances to houses, kitchens, stairways and public buildings. |
Wet abrasion resistance Class 2 (according to DIN 53778) Cleaning the paint with water and a natural bristle brush. Possibility of adding a neutral or hygienic cleaner. Suitable for heavily used interior surfaces, e.g. children's rooms or bathrooms. |
Wet abrasion resistance Class 3 (according to DIN 53778) Cleaning the paint with water and a cloth or sponge. Possibility of adding a neutral detergent. Suitable for interior walls and ceilings that are not subject to repeated friction. |
- Satin
- 13m2/ltr
- Water
- comfort in use
- easy to apply
- Manual preparation
- Strong Adherence
- Washable
- without solvents
- inside
- Outside
| Sort by Price | Sort by Availability | Sort by Size |
|---|---|---|
43.95 CHF
|
In stock
|
Size:
|
129.95 CHF
|
In stock
|
Size:
|
Tutoriel
Video promo Reflow